How to Make a Hair Rig – Step-by-Step Guide 2020!

Carp fishing is fun yet it entails the appropriate fishing gears, the perfect fishing spot, and the right time of the day to have a good catch. Aside from that, the proper carp fishing tool setup is also important for carp fishing. One of these is proper on how to make a hair rig. In case you are a novice angler and want to learn more about this carp fishing setup, then you are on the right track. Let’s check them out below.

Different Types of Rigs for Carp Fishing

Generally, prior to knowing the ways on how to make a hair rig, you might ask for the best rigs for carp fishing. Actually, looking for the best one is really impossible as there are lots of various rigs out there that are qualified to be on top. To help you choose for your preference, here are the different types of rigs for carp fishing:


Over time, carp developed an acute sensitivity on angling pressure. Due to this, modern-day anglers think of new and innovative ways especially in terms of clear water beds in which the rigs visibility is more noticeable. Moreover, this makes a way for the anglers to find out methods on carp’s natural feeding spots. With this comes the birth of the pop-up baits through the use of polystyrene or styrofoam with a conventional boilie paste covering.

Further, as time passed by, the pop-ups were then replaced by cork balls with boilie paste covering. This is generally a good replacement as it is far more eco-friendly which is also prepared in the same way of boilie preparation through boiling or steaming. Generally, the concept revolves around the creation of lesser density bait thus making it to float. This bait leads the way for the utilization of commercial pop-ups using cork dust or other materials that are buoyant.

Unchangeably, this pop-up made a demand for having innovated rigs to showcase new buoyant baits. Later than the 1980s, worldwide carp anglers have followed the ideas of the old rig versions. There are others who have jumped out of the box to produce effective rigs of the pop-up type.

Among these effective rigs was the Multi-Rig in which most of the credit was given to Mike Kavanagh being recognized as the “Carp Guru“. But, since the real origin of this rig is ambiguous, there are others who were claiming to be the first one to come up with the idea of having a sea-fishing rig. This is basically known as the Sliding-Hook Rig.

Advantages of Multi-Rig:

One great feature of using this multi-rig is that the hook is quickly replaceable without the need for a retie. Basically, you just have to reverse the process of hooking into the loop. That way, you can generally replace the hook of the multi-rig the moment it looks dull or gets bent. Aside from that, the multi-rigs have lots of confidence displayed through various types of water.

Disadvantages of Multi-Rig:

The multi-rig has a coated braid material that is generally used for tying the rig. This material will eventually degrade over time thus increasing the chance that the looped area of the structure will begin to degrade. The good thing is that frequent rigs checking prior to recasting may highly avoid this kind of problem.

Ronnie Rig

The Ronnie Rig is also known as the Spinner Rig. The concept of this rig actually revolves on fishing without a hook tied over a line. This type of rig is generally separated by a swivel from the rig to the hook. The hook will then pass through one of the barrel-swivel ends where stoppage over the hook-eye is allowed.

Ronnie rig or the spinner rig is amazingly effective to be used over various waters in the UK and Europe. But, the hardware quantity and the possibility to cause unwanted damage during fishing are major criticism for this rig type. Typically, tying this type of rig is through the use of quick-change swivel or via the utilization of a specialized spinner rig swivel. 

Unpredictable Feature of Ronnie Rig:

Generally, anglers might want to catch a carp properly hooked over the bottom tip of the mouth. The other best position for catching a carp is to hook it in the corner of the concentrated flesh. Unfortunately, using this rig, you might find it hooked on the roof of the mouth on some occasion. There are even times that you can hook the carp outside the mouth. Because of this, Ronnie Rig’s reputation decreases.

how to make a hair rig

Withy Pool Rig

Another type of rig is the Withy Pool Rig which revolved on the basic idea of a rig that is generally difficult to retrieve from the fish’s mouth. Withy Pool was actually the name of the water which is so tricky and located in Bedfordshire, UK. This rig type is very simple and is actually one of the best pop-up rigs in the market.

Basically, the tying of this rig is through the use of the semi-stiff coated braid with stripped back-length, a hook with curve-shank, lengthy shrink tubing, hook-stop, rig-ring, and a split-shot. Moreover, by using the knot of your choice, you can generally tie the hook to the coated braid. Afterwards, cut the shrink tubing in order to fit on the hook’s eye. This is for the purpose of breaking the coating of the braid.

Moreover, by the use of a kettle, simply heat the shrink tubing and when it is still malleable, form it into a “C” shape. Finally, attach the rig-ring, hook-stop, and the preferred split-shot. The finishing touches will give an offset to the bait’s buoyancy. Aside from that, you can prove to have a good carp-catcher.

The Way to the Top of the Withy Pool Rig:

Generally, what makes the Withy Pool Rig a top choice of most anglers is its composition through the use of a single length of the braid. This is highly advantageous compared to other rig types that use a mixture of braid and fluorocarbon. In fact, they say that the more knots there are in a rig, the higher the chance that it fails.  

Shotshank Rig

Generally, the idea behind the Shotshank Rig is actually different but it is not original. It is basically a mixture of two separate concepts. Initially, the one revolves around the existence of a spilt-shot attached into a small braid. This is eventually fixed in place either through a burning process or blobbing the braid using a lighter.

Basically, the Shot-on-the-Hook Rig is the original concept of this rig type which was a creation of Frank Warwick. There is a heavier hook-point present on this Shot-on-the-Hook Rig. Typically, the moment the carp sucks over the rig and the rig happens to experience a free-fall, the weight will drive down the hook and give a great hooking possibility.

Main Concern on Shotshank Rig:

The primary concern involved in the utilization of the Shotshank Rig is the potential of the split-shot to impede the ability of the hook to penetrate deeper. But, trying to spool stainless steel with braid generally gives you an idea that braid will slip over the steel and basically demands a backing. The spooling of the stainless steel with braid works on the same way with that of the Shotshank Rig.   

Hair Rig

Generally, the Hair Rig is the most popular rig for carp fishing. The function of this rig is primarily to take out the bait from the hook thus leaving the hook entirely exposed. This way, the hook will be unimpeded once the rig enters the mouth of the carp.

Historically, Kevin Maddocks and Len Middleton were the ones who introduced the Hair Rig in the UK. The Hair Rig consists of a monofilament line attached to the hook’s shank that has a whip-knot. During the 1980s, Maddocks and Middleton shared their Hair Rig idea with the angling magazine which made the Hair Rig to be found in every angler’s rig wallet.     

The Variations of Hair Rig:

There had been modifications done over the Hair Rig which made use of some fishing components. These components include the following – shrink tubing, split shots, hook-length materials combination, and rig-rings to name a few. As time goes, this variation of Hair Rig is eventually called the Blowback Rig which works on the same concept.

Generally, the use of Hair Rig is common during fishing with corn, single boilie or a mixture of pop-up baits and larger boilie attached on the hair. Moreover, utilization of Hair Rig is highly recommended on fishing over clear water with flat rock or dense silt. This is due to the reason that the hook will be free of any obstructions like weeds as the rig will lay flat on the bottom. Ideally, a solid bottom clear of any debris is one way on how to make a Hair Rig a good carp catcher.

Step-by-Step Guide on How to Make a Hair Rig

Generally, a carp rig, like the hair rig, is a setup for fishing fixed over the end of the fishing line. It basically utilizes a bait ball on order to have a perfect carp catch. The process of how to make a hair rig is actually easy and highly effective. The initial step on how to make a hair rig is to form a hair. Do this by creating a loop knot over the end of the long fishing line.

Afterwards, fix the bait into the rig through hair threading and keeping it in place using a bait stop. Subsequently, slide the hook over the rig and tie the knotless knot so that it will secure the line. In order to attach the rig on the fishing line, basically incorporate a tiny piece of swivel over the end of the rig. Then you’re set!

Below is the step-by-step process on how to make a hair rig of your own! But, before that, here are the essential things that you’ll need:

  • Test braided fishing line – about 20 lb or 9.1 kg
  • Stripping tool for fishing line
  • Needle for baiting
  • Bait
  • Bait stop
  • Hook – around size 6
  • Swivel

Formation of Hair Loop

1. Make a carp rig

The first step on how to make a hair rig is through the use of a test braided fishing line. This should have a weight of around 20 lb or 9.1 kg. The so-called “tests” on the fishing line basically determines the amount of force that it can withstand prior to its breakage.

Keep in mind that carp are strong and large fish that eventually necessitates all anglers to have a strong fishing line in the way on how to make a hair rig in order to catch them. An ideal fishing line is the one that is braided and rated with a 20 lb test. Moreover, if you want to know how to make a hair rig, you can also use a fishing line with a rating higher than 20 lb.

2. Cut the fishing line

The next thing to do on how to make a hair rig is to cut the fishing line with a measurement of about 12 inches long. In cutting a length of fishing line on how to make a hair rig, you can use either a knife or s scissors. Basically, make at least 1 clean cut in trimming the fishing line. This will make the braided cord not to the fray over the end.

how to make a hair rig

Once you form it, basically fix the rig into the fishing line of the rod. In case you have a plan of making more than 1 rig, trim some lengths of fishing line for you to use.

3. Strip back the coated braid

Over the back of the coated braid, generally, strip around 3 inches of the braid. This is the next step on how to make a hair rig. Get a fishing line stripping tool and put the end of the line inside it. In order to take out the outer covering of the line, gently pull the line via the tool.

4. Create a hair loop

The next thing to do on how to make a hair rig is to make a hair loop by tying a loop knot over the stripped section. Using the end of the fishing line, form a tiny loop and tuck in there the end of the line. Afterwards, wrap the end of the line over the loop and generally tie a knot tightly. Basically, provide a good tug to guarantee its security.

Actually, this way on how to make a hair rig is just a basic loop knot. However, you can generally tie any kind of loop knot that you prefer. Just ensure that the loop is basically protected and that the knot won’t get undone. It is also better to cut out any extra lining coming from the loop knot.

Hook and Bait Attachment

1. Thread the hair over the bait

As part of the way on how to make a hair rig, you must thread the hair over the bait using a baiting needle. Just simply put in the loop inside the baiting needle and push the needle on your preferred bait. Generally, leave a small portion of the loop attaching on the other part of the bait. Afterwards, remove the needle used for baiting.

2. Attach the bait stop

Another step on how to make a hair rig is the attachment of small bait stop on the hair loop. This is usually located on the other part of the bait. Place the bait stop over the inside portion of the hair loop. The loop should stick out of the tip of the carp bait and pull the line in order for the bait stop to wedge.

3. Thread the end of the fishing line

Through the use of the hook eye with a standard size of 6, basically thread the end of the fishing line. This is one of the steps on how to make a hair rig. Place the hook in a position that is around 1 inch from the bait.

4. Create a knotless knot

One way to secure the hook over the line on how to make a hair rig is to create a knotless knot on top of the hook. Basically, keep the hook with a measurement of 1 inch from the bait. Moreover, wrap the fishing line all over the end of the hook. Do this for about 8 times and thread the fishing line end going back on the hook eye and pull it tightly.

5. Tie a swivel

Finally, one of the steps on how to make a hair rig is tying a swivel on the other part of the fishing line using a loop knot. Basically, slide the opposite end of the line over the bait via the tiny piece of the metal swivel. Create a loop over the line and wrap it around itself. Do this for about five times over the loop. Generally, pull the line tightly.

Final Thoughts

The way on how to make a hair rig is actually very easy and really effective. It generally helps anglers to have good carp catch. Basically, it entails a simple and basic procedure that can be easily followed even by novice anglers. All you need to do is to prepare the needed fishing tool and equip yourself with the proper way on making a hair rig. This will eventually give you a great carp fishing experience.